What to Buy¶
LUC3D itself costs nothing and runs in Chrome or Edge. To make your own 3D recordings you need synchronized cameras, software to record them, a calibration board, and a computer to proofread on. This page lists the parts, says what the lab's rigs use, and gives rough prices. The rigs themselves are described in Tested Rigs & Datasets.
Recording is not part of LUC3D. The lab records with campy, whose hardware page has the full shopping list with part numbers, the recording computers measured with every camera count, and the wiring.
Prices
Prices were checked on 29 October 2026, in US dollars, before tax and shipping. They change often and differ by country and institution; take them as a guide.
What LUC3D needs from a rig¶
- The same moment in every frame n. LUC3D pairs frame n of every camera. Trigger all cameras from one hardware clock, at the same frame rate, starting on the same pulse. Free-running cameras drift apart.
- A calibration of every camera (
calibration.toml). Focus, zoom and aperture must stay put afterwards, and so must the cameras. See Camera Calibration. - Each animal seen by at least two cameras, from well-separated directions. How many cameras, and where, is in Choosing Cameras & Calibration Boards.
- Video the browser can decode: H.264 or H.265 (HEVC) in MP4. A keyframe every few seconds or less keeps seeking quick. Chrome on Windows decodes H.265 only on a GPU, so a Windows PC without one (a typical virtual machine) shows no video; Macs decode it in hardware.
Shopping list¶
| Part | What the lab uses | Price | Notes |
|---|---|---|---|
| Cameras | FLIR Blackfly S BFS-U3-13Y3M-C (mono) or BFS-U3-13Y3C-C (colour): 1280×1024, global shutter, up to 170 fps, USB 3, with a ¼"-20 tripod adapter ($18). The lab's rigs run mono | $720 each in stock ($480 listed where none were in stock) | Colour for visible light; mono for infrared, since FLIR's colour models have an infrared-cut filter. A mono camera under infrared may need a lens that takes an NIR (IR-pass) filter. campy records FLIR and Basler cameras. A global shutter keeps fast movement undistorted. |
| Lenses | A 4–12 mm varifocal C-mount lens (Edmund Optics #58-365) | $278 each | One lens fits any distance. Lock zoom and focus before calibrating. It has no filter thread listed, so for a mono camera under infrared, take a lens that takes an NIR filter: for a wide view, the lab's pick is Thorlabs' MVL5M23 (5 mm, M40.5 × 0.5 filter thread, $684). Fixed lenses cost less: campy's lens table turns distance and arena width into a focal length. |
| Trigger | Arduino Nano ESP32 on a screw-terminal adapter, its pulse carried on BNC (a 3 m cable and T adapters) to a BNC-to-screw-terminal breakout at each camera, then FLIR's 6-pin GPIO cable; WAGO lever connectors for the wires | $19.30 board, $12.30 adapter, about $110 of BNC parts and wiring, and $72 a camera for breakout and GPIO cable | campy's trigger sketch also runs on a Teensy 4.0 or an Arduino Uno. |
| USB 3 cables | FLIR's 3 m locking cable, Type-A to Micro-B | $25–41 each | Past about 5 m, an active cable ($119–161 for 10 m). |
| USB card | Basler USB Interface Card, 4HC, 5G, 4 Port: one controller per port, PCIe x4 | about $142 per 4 cameras | Add a second card above 4 cameras. |
| Lights | CMVision CM-IR130-850NM, 850 nm infrared | $75 | Needs mono cameras. Lights must not flicker at short exposures. An NIR (IR-pass) filter on each lens ($109–117) keeps room lights out. |
| Calibration board | calib.io's coarse 300×200 mm ChArUco | about $137 | Which one to choose: Choosing Cameras & Calibration Boards. |
| Mounts | Magnetic mounts, clamps or Thorlabs rails and framing | $16–25 a camera, more for framing | |
| Recording computer | See below | — | |
| Video disk | A separate 4 TB NVMe SSD | about $630–800 | How fast a camera fills it: below. |
The lab's 4-camera list (cameras, lenses, cables, trigger wiring, USB card, light, mounts and board) comes to about $5,200 before the computer and the video disk; campy's shopping list has every part with its link.
The recording computer¶
The computer records every camera at once, compressing each into a video on its GPU's video encoder, and can track the animals live. campy's hardware guide measured four machines:
| Machine | What it is | Tracked live | Price |
|---|---|---|---|
| GMKtec EVO-X2 (the lab uses) | Mini-PC, AMD Ryzen AI Max+ 395 with its integrated GPU, 64 GB; Ubuntu | 3 cameras at 60 fps, 5 mice | about $2,200 |
| Dell Pro Max Slim FCS1250 (the lab uses) | Intel Core Ultra 9 285, NVIDIA RTX 2000 Ada; Windows | 3 cameras at 60 fps, 5 mice; 4 cameras at 30 fps | $2,088 before a GPU. Dell no longer offers the RTX 2000 Ada in it; the card alone is about $710–850 |
| Dell Precision 7875 | Threadripper PRO 7965WX, NVIDIA RTX 6000 Ada + RTX 4000 Ada; Windows | 8 cameras at 60 fps, any model size tested | $6,392 before GPUs; an RTX 6000 Ada is about $9,100 |
| Dell Pro Tower Plus (the lab uses) | Intel Core Ultra 9 285, NVIDIA RTX A2000 12 GB; Windows | 8 cameras at 30 fps, 5 mice, recording on the CPU's Quick Sync | about $2,350–2,830 before a GPU; the RTX A2000 is about $570–650 |
Recording alone, without live tracking, takes far less: their video encoders kept up with 12 to 28 cameras each at 1280×1024 and 60–80 fps.
Give the videos a disk of their own. At the lab's settings a camera writes about 14 GB a day at 30 fps (H.265, 1280×1024) and 30–40 GB a day at 60 fps; the 18-camera rig's 120 fps, 1680×1200 videos at high quality wrote about 560 GB per camera per day.
The proofreading computer¶
Any recent computer with Chrome or Edge runs LUC3D. Two things matter:
- Video decoding. For H.265 on Windows, a GPU with an H.265 decoder and its maker's driver. Macs with Apple silicon decode it in hardware. On Linux, check that Chrome plays your videos before you rely on it, or record H.264.
- Memory. Long recordings with many cameras load lazily: only the frames around the one on screen are kept in memory, because the browser caps a page near 4 GB. LUC3D was developed on Apple-silicon Macs and tested on Windows PCs with NVIDIA GPUs.